Electronic counter CP-20, which also has a pre-determined function, which allows the operator to pre-program the equipment downtime in the previously desired films. This counter, can come with RS-485 serial port that communicates with computer systems of your company.
To better use precision counters, we recommend some precautions during use:
There should always be checked if the lower polyurethane roller support to the generator, is in good condition, clean and free of obstacles.
The pulse generator should be positioned perpendicular to the lower roller with an applied pressure of at least about 03 kg roller.
Using a scale as shown below, or the like, to obtain the appropriate pressure.
The steering wheel (wheel) of the electronic generator (Emitting magnetic pulses to the electronic counter), has an outer diameter of 95.50 mm. Any variation in the diameter, either by wear or other factors, will result in an incorrect reading of the electronic counter. Making a monthly calibration, using a caliper for a correct reading of the dimensions of the wheels.
Technical Specifications
Maximum operating temperature: 45
Standard voltage: 220V
Weight: 0.800 kg
Electronic counter CP-20 model, which has a pre-determined function and allows the operator to pre-program the stop of the measuring equipment in the desired films. For better use of the equipment it is necessary to take some precautions, such as the position of the pulse generator and the analog meter diameter, as well as continuous monitoring of the lower roller polyurethane, which should not be changed, and the position it should occupy perpendicular in relative to the lower roller.