Analog counter with measurements from 0 to 99999.0. Suitable for dry cleaners where the environment are often subject to chemical contaminants that can damage electronic series of counters.
To better use precision counters, we recommend some precautions during use:
The analog meter should be positioned perpendicular to the lower roller with an applied pressure of at least about 03 kg roller. It should always be checked the lower roller polyurethane support counter to see if it is in good condition, clean and free of snags.
Using a scale as shown below, or the like, to obtain the appropriate pressure.
The steering wheel (wheel) of the analog counter, has an outer diameter of 97.0 mm. Any variation of this diameter, either by wear or other factors, will result in an incorrect reading in the reader. Making a monthly calibration, using a caliper for a correct reading of the dimensions of the wheels.
Technical Specifications
Maximum operating temperature: 45
Weight: 1.650 kg
Analog MT-A counter with a maximum working temperature at 45, is a device for measuring indicated for dry cleaners where the environment are often subject to chemical contaminants that can damage electronic series of counters. For optimal use it is necessary to take some precautions, such as the diameter of the counter analog, which must not be changed as well as the perpendicular position that it should occupy relative to the lower roller. “